How to use the mop
Glue mop
A. Put the rubber head in the bucket to absorb water quickly, and gently pull the lever to squeeze the water out easily. In the wiping process, it is relatively easy to clean the ground, and even if it is to deal with a larger and harder mud print, it can be removed by wiping it several times. The mopping of the mop is also very easy.
B. It should be noted that if the hard tile floor is rubbed, the water should not be squeezed too dry, otherwise it will not move.
C. After the cleaning is completed, place the mop in a ventilated place. After the water evaporates, the rubber head becomes very hard and no odor is generated.
D. In addition, since the rubber head can extrude 80%-90% of water, it can be used not only for the cleaning of laminate flooring, but also for quickly washing out a large amount of water, soup, etc. that are accidentally sprinkled on the ground.
Microfiber material mop
A. This kind of mop is very light, and the metal material is slightly heavier. The mop telescopic rod adopts a taper thread lock, which ensures that the mop can be adjusted at will. Due to its flat design, it can penetrate deep into the original cleaning corner of the sofa and furniture gap.
B. Note: Microfiber fabrics are more susceptible to damage and cannot be wiped over hard surfaces. The whole process of loading and unloading is convenient and fast, but it needs to be taken and replaced by hand.
C. When drying, the fine cotton yarn mop and microfiber cloth can be directly removed and separated from the mop. The former is more difficult to dry.
Tampon (line) mop
A. The most traditional cotton mop, which is usually wood, is the cheapest. However, it is heavier to use, and it is more difficult to screw the water. Although the cleaning power when rubbing the ground is OK, the ground leaves more water marks and is not easy to dry. Sometimes, during the rubbing and washing process, the strip will fall off.
B. The mop of the yarn head is relatively better than the cloth mop, but pay attention to more cleaning, otherwise the white yarn will easily become "Cinderella".
Water absorbent fiber mop
A. This kind of mop is generally made of plastic tube, which is much lighter. Fill the bucket with water, put it on the wringer, press it firmly, and the water will be squeezed out, and it will be dry than the hand.
B. When wiping the ground, the steering and the like are more flexible, and the corners and corners can also be reached. However, because the fiber cloth is lighter, it is still rubbed several times to deal with stubborn stains. With a wringer, the mop is easier to clean, easy to dry, and has a lower odor.
Multifunctional floor cleaning machine
A. After starting the machine, the brush of the machine will start to rotate immediately, brush the floor like a brush, then wipe off the dirt with the cleaning cloth matched with the original machine, but after wiping a small area, it will be cleaned. Otherwise, It will leave a slight "black circle" on the ground. If you mix it with a semi-dry cloth mop, the cleaning effect is very obvious.
B. In terms of cleaning function, this machine is more suitable for cleaning large areas and dirty hard floors, but it is a bit troublesome to use.